Wood Furniture Distressed Finishes

Beth Rice 15/05/2017

Standard finishes often add the perfect touch to your solid wood furniture. They offer protection as they enhance the look of the wood. In addition to a standard stains and paints, there are a number of exciting furniture finishing processes that can bring out the beauty of the wood in different ways while adding décor to a room. Distressed finishes including light to heavy distressing, wire brushing, and sandblasting give the wood a new look. These techniques create an aged appearance that makes your custom furniture look like an antique.

No Stress in Distressing

There’s something about furniture with signs of wear that’s comforting. Enhancing the wood to make it look like it has been passed down makes it seem like the furniture has history and that it has been used and loved.

Distressing involves manually creating signs of wear and age that give the furniture character. It involves using a combination of stains, paints, glazes, and marking techniques for a one-of-a-kind look.

Light to Medium Distressing

Light to medium distressing involves sanding furniture to simulate wear. Wear points, nicks, pinholes, lightly eased edges, indentations, and rasp marks may be visible, and the furniture may have a hand-rubbed finish.

The Amish Royal Court Dining Chair displays a weathered look and hand-rubbed finish.

Amish Royal Court Dining Chair

Heavy Distressing

Heaving Distressing displays an extensive amount of hand distressing, pin holes, eased edges, indentations, nicks, rasp marks, and simulated cracks. Edges appear to be heavily worn to create a vintage look.

The Amish Pine Wood Large Pie Safe features eased edges, indentations, nicks, and heavy wear.

Amish Pine Wood Large Pie Safe

The French Country Kitchen Island is shown with heavy distressing, rub through finish, and hand planed top.

French Country Kitchen Island

Distressing Techniques

Tools used for distressed finishes include hand planers, ice picks, heavy chains, and drill bits. An added benefit to the welcoming look of distressed furniture is that any real wear and tear over the years won’t show. Scratches, dents, and dings that may occur simply add to the natural beauty of the finish.

Eased Edges or Wear Points

This technique is used to create signs of wear where they would normally occur over time. The wood is sanded and scuffed to simulate years of use. The techniques are used where the furniture would most often begin to show signs of wear such as chair rungs and wooden knobs or handles.

Pin Holes or Worm Holes

Pin holes and worm holes are recreated in the wood using ice picks, drill bits, nails, or sharpened awls. Holes vary in size and represent where worms would have burrowed in the knotty part of the tree.

Hand Rubbed Glazing

After the furniture is stained, a glaze is hand rubbed all over the initial stain to create a darker, deeper finish that brings out the distressing. Glazes are pigmented stains that give the furniture an antique, naturally aged look. Glaze can only be applied over light stains as it will not be noticeable over dark stains or paints.

Rasp Marks

A rasp is similar to a file but has very rough edges similar to sharp teeth. A rasp is used on furniture edges to create pronounced wear and tear that is more dramatic than eased edges.

Rubbed Paint Finish or Rub Through

Edges are hand rubbed to create the look of paint naturally wearing away over the years. When the paint is rubbed off, the finish beneath is revealed. This technique contributes to an aged look.

Simulated Cracks

Cracks are created just along the top of the wood to make it look like the furniture is naturally cracking. Simulated cracks do not jeopardize the strength of the wood. This technique is used in heavy distressing.

Hand Planed Tops

Hand planing involves using the long flat sole on a hand plane to remove the top-most layers of an imperfect surface. A woodworker applies force as he runs the cutting blade over the surface to reduce thickness and smooth the wood for the desired look. Hand planed tops are smooth but not perfectly even, giving the furniture an authentic, vintage look.

Hand-Planing

The Lexington Kitchen Island features a time worn look with a hand planed top.

Hardwood Kitchen Island - Lexington Three Doors and Two Drawers

Hand Burnishing

Burnishing can dress up a table or make it look older. The burnishing process can be done by hand or with a tool. Wood fibers are rubbed against the wood, yielding a very smooth surface. Burnishing gives the outer edges of furniture a darker shade and the body of the furniture a lighter shade.

The Amish Sterling Single Pedestal Desk features burnishing.

Amish Sterling Single Pedestal Desk

Amish Sterling Single Pedestal Desk

Wire Brushing

Wire brushing produces a weathered and worn look. A wire brush is run over the wood  in the same direction as the wood grain before it is finished, creating long, clean lines across the wood. The brush will wear away at the softer parts of the wood more quickly than the harder parts, creating a textured finish.

Oak Barn Gray Heavy Wire Brushed

Sandblasting

Sandblasting is the process in which sand or another medium is shot at a high speed through a machine across the surface of the wood. Sandblasting wood raises the grain, creating an uneven tone with a smooth finish. Sandblasting can resurface and reshape the wood quickly and requires a steady, experienced hand.

Sandblasted Wood Sample

Distressing techniques open up a new arena of possibilities for your custom furniture. Enhance the character of Amish furniture with a time-worn, antique look in the custom finishing process of your choice.

Visit our Learning Center for more on distressed wood furniture.

Related Posts
Staff Picks: Our Favorite Wood Types and Finishes

Wood type and finish contribute directly to the look of and style of custom furniture. Wood type determines the strength, Read more

Three Popular Amish Furniture Wood Stain Colors

Wood stain colors can make or break the look of wood furniture, and choosing one is a big decision. Stain Read more

5 Questions About Log Furniture

Let’s face it. Log furniture helps us disconnect. Its natural rugged look represents another time long ago, when things were Read more

Walnut vs. Brown Maple: Which Makes Better Furniture?

Walnut and brown maple are two woods that look good in dark stains. They’re easy to work with and both Read more

About the Author

2 comments

  • Norah Arnold
    April 11, 2020 at 10:57 am

    I love hardwood but I do not see very many variety. I am looking for a sink vanity French country style for a small bathroom. I see the ones I like on other web sights but not of hardwood.


  • Beth Rice
    April 13, 2020 at 11:18 am

    Hi Norah,
    Thank you for visiting Timber to Table. I would suggest connecting with one of our furniture specialists by email or phone. We specialize in customizations and if you don’t see the style you like in our collection, they might be able to direct you to what you are looking for or have one custom made to your specifications.

    Furniture specialists can be reached by Email: Questions@DutchCrafters.com or Phone: 1-866-272-6773


Leave a Reply